Environment Three: Dell Networking Switches With Mvlt And Fn Iom In Programmable Mux Mode - Dell PowerEdge FX2 Deployment Manual
Configuring, testing and validating vlt on a pair of fn410s i/o modules in a
poweredge fx2 chassis (v2.2)
Hide thumbs
Also See for PowerEdge FX2:
- User manual (154 pages) ,
- Owner's manual (98 pages) ,
- Configuration manual (24 pages)
Table of Contents
Advertisement
8
Environment Three: Dell Networking switches with mVLT
and FN IOM in programmable MUX mode.
This section presents an example of Dell Networking switches working together in an mVLT
configuration.
Figure 37 illustrates using Dell EMC's VLT protocol on a pair of IOMs in a switch environment
consisting of two Dell Networking S4810 switches. In this mVLT configuration, multiple valid paths
exist which enable the environment to survive the failure of one S4810 switch and/or one IOM, and/or
one NIC interface per server. Because all paths are actively used, the result is a highly fault-tolerant
environment. This fault-tolerant environment makes full use of the throughput capabilities of all
switches.
FC630 Server
PowerEdge FX2 – FN I/O Module – VLT Deployment Guide | Version 2.2
51
mVLT Configuration with a PowerEdge FX2, IOMs and S4810 switches
VLT Domain
FN410S-A1
VLTi
FN410S-A2
VLT Domain 2
S4810-1
VLTi
S4810-2
Hide quick links:
Advertisement
Table of Contents
