Adapter Params - Printronix H-SERIES P7000 User Manual

Gateway Address
A gateway address is the IP address of a hardware device (gateway) that
translates data between two incompatible networks, which can include
protocol translation.
MAC Address
This menu item is the Manufacturer's Assigned Number, and is unique for
each printer. It is read-only.
DHCP
You can enable/disable the DHCP protocol using this option, but consult your
administrator for the appropriate setting.
The options include:
•
Disable (default)
•
Enable.

ADAPTER PARAMS

ADAPTER
PARAMS
(from page 76)
Novell Nest Serv
Protocol Type
Enable* Auto*
Disable Bindery
NDS
IPDS Keep Alive
1
Data Port Timer
5001* 3 Minutes*
1023-65535 2 - 10 Minutes
You may enable or disable the Novell or NetBIOS Protocols within this menu,
as well as selecting which Novell Frame scheme to use in processing Novell
signals. See the Novell chapter in the Network Interface Card User's Manual
for more details.
NetBIOS
Novell
Protocol Frame
Enable*
Auto Sensing*
Disable
Ethernet II
Ethernet 802.3
Ethernet 802.2
802.2 Snap
Job Control
Ethernet
Speed
Standard*
Auto Select*
Enhanced
10 Half Duplex
10 Full Duplex Off
100 Half Duplex
100 Full Duplex
ADAPTER PARAMS
* = Factory Default
1
If Installed
ASCII
Data Port
9100*
1023 - 65535
77