Host Interface; Reset Cfg Names - Printronix H-SERIES P7000 User Manual

Reset Cfg Names

You can reset specific configuration names back to the default value of the
configuration number.
Auto Save
•
Enable (default). When a change has been made to a configuration
menu, this option automatically prompts you to save or not save the
change to config #. If you are currently in the Factory Config. menus and
make a change, pressing Enter saves to Config 1 or the next available
config. and becomes the Power-Up config. If the current config is Config 1
and a menu change is made, pressing Enter will save the change to
Config 1.
•
Disable. The printer will not prompt you to save any changes made.

HOST INTERFACE

HOST
INTERFACE
(from page 50)
Auto Centronics
Switching*
(see page 62)
(see page 60)
1
Ethernet
(see page 75)
The Host Interface Menu enables you to select and configure one of many
types of interfaces between the printer and your host computer. The currently
selected interface is indicated with an asterisk on the control panel message
display. Each interface has its own submenu with a set of interface
parameters which can be configured.
* = Factory Default
1
Available when an Ethernet is present.
2
Available when an Adapter is present.
Dataproducts Serial
(see page 64) (see page 67)
Optimizing Print Speed HOST INTERFACE
E-Net
IEEE 1284
2
Adapter
(see page 74)
(see page 73)
59