Hex Dump Mode; Downloaded Fonts; Ptx Setup Option; Power-Up State - Printronix H-SERIES P7000 User Manual

Chapter 4
ADVANCED USER

PTX Setup Option

Selects the Special Function Control Code for the PTX_SETUP command
and functions.
•
Setup Parse. Disables or enables the PTX_SETUP command.
•
Setup SFCC. Allows you to choose the hex value of the ASCII character
you wish to use as the SFCC for the PTX_SETUP command. Valid hex
values are 01-FF. The default value is hex 21, which corresponds to the
"!" character.

Hex Dump Mode

A hex code printout (or hex dump) translates all incoming data to hexadecimal
equivalents. A hex dump lists each ASCII data character received from the
host computer, together with its corresponding two-digit hexadecimal code.
Hex dumps can be used to troubleshoot some types of printer data reception
problems. The options include:
•
Disable (default)
•
Enable
Figure 28 on page 129. shows a hex dump sample.

Power-Up State

•
Online (default). The printer powers up in the online state.
•
Offline. The printer powers up in the offline state.

Downloaded Fonts

Allows you to download a substitution table to replace any character in the
current character set with a different character in the same font.
•
Char Operations. Allows you to delete a character from flash, load a
character from flash, save a character to flash, and delete a character
from RAM.
•
Ld Char at Pwrup. Allows you to disable or enable loading a character at
power up.
•
Set Operations. Allows you to delete a character set from flash, load a
character set from flash, save a character set to flash, and delete a
character set from RAM.
•
Ld Set at PwrUp. Allows you to disable or enable loading a character set
at power up.
•
DBCS Download. Allows you to save and delete downloadable DBCS
characters from flash.
102