Paper Jams - Printronix H-SERIES P7000 User Manual

Appendix C
Performance Limitations
Description
One to three part, continuous, with carbon, fan-folded,
edge-perforated paper forms
One to four part, continuous, with carbon, fan-folded,
edge-perforated paper forms
One to four part, continuous, carbonless, fan-folded,
edge-perforated paper forms
One to six part, continuous, carbonless, fan-folded,
edge-perforated paper forms
Forms with a paper weight of 20 to 100 pounds and a
maximum thickness of 0.025 inches
Forms with a paper weight of 18 to 100 pounds and a
maximum thickness of 0.025 inches
Forms with all approved types of interleaf edge attachment
except those using metallic or other hard devices
NOTE: If you use forms outside these limits, the print quality may not be

Paper Jams

Printer jams can occur if you tear off the form incorrectly. If you experience
two or more paper jams per box of forms, follow these guidelines to help
reduce jams:
•
Position the lower paper guides properly
•
Align the paper web tightness properly
•
Position the form perforation against the tear bar
•
Time the tear, while the paper is not moving
•
Direct the tear force toward the user and across the tear bar, not upward.
User Environment
The ZTP is noisier than the standard pedestal printer because the forms exit
the printer out of the top of the pedestal lid.
174
Table 13. Forms Type
optimum, the printer may lose top-of-form, the frequency of paper
jams.
Width
Length
(edge to edge)
3 to 12 inches 7 to 16.5 inches
3 to 12 inches 7 to 12 inches
3 to 12 inches 7 to 16.5 inches
3 to 12 inches 7 to 12 inches
3 to 12 inches 7 to 16.5 inches
3 to 12 inches 7 to 12 inches