Printronix H-SERIES P7000 User Manual page 42

Chapter 4
Configuration Overview
The following procedure shows how to change and save the settings for the
Unidirectional and Accented Char options. Use these guidelines to navigate
the configuration menus and change other parameters.
Step Press
1. Make sure the printer is on.
2.
ON LINE/CLEAR
3.
+
4.
UNTIL
5.
6.
UNTIL
7.
8.
OR
9.
ENTER
42
LCD
OFFLINE
QUICK SETUP
ENTER SWITCH Allows you to make configuration changes.
UNLOCKED
OFFLINE
QUICK SETUP
OFFLINE
PRINTER CONTROL
PRINTER CONTROL
Ribbon End Point
PRINTER CONTROL
Unidirectional
Unidirectional
Disable*
Unidirectional Cycle through the choices.
Enable
Unidirectional The * indicates this choice is active.
Enable*
Notes