Operational Procedures; Reload Paper - Printronix H-SERIES P7000 User Manual

Operational Procedures

This section contains routine printer operating procedures on how to:
•
•
•

Reload Paper

Do this procedure when "LOAD PAPER" displays. (This message occurs
when the last sheet of paper passes through the paper slot.) This procedure
reloads paper without removing the last sheet of the old paper supply, while
retaining the current top-of-form setting.
Cabinet Models
1. Raise the printer cover. Raise the platen lever as far as it will go. (See
2. Press ONLINE/CLEAR to turn off the alarm. Do not open the tractor doors
3. For cabinet models, open the front door. Align the paper supply with the
4. Feed the paper up through the paper slot (see Figure 6). It may be easier
NOTE: If you are using thick, multi-part forms and are unable to load the new
5. Hold the paper to prevent it from slipping down and through the paper
reload paper;
unload paper;
cancel a print job.
Paper Slot
Figure 6. Paper Slot Location
"Printer Component Locations" on page 17 for the location of the lever.)
or remove the existing paper.
label on the floor. Ensure the paper pulls freely from the box.
to feed one corner of the new paper up through the slot first. When this
corner can be grasped from the top, rotate the paper back to the normal
position.
paper over the existing paper, go to step 15.
slot.
Paper Slot
Pedestal Models
Reload Paper
23