Diagnostics; Rbn Low Action - Printronix H-SERIES P7000 User Manual

RBN Low Action

This menu determines how the printer behaves once a ribbon low condition is
reached.
•
Warn & Continue (default). Once a ribbon low condition is reached the
printer beeps and displays the "RIBBON UNDER XX% / Change RBN
Soon" warning message. Printing will continue without interruption. The
warning message can be cleared by pressing the ONLINE/Clear button,
however the message will persist again in two minutes. This action will
continue until a ribbon out (ribbon life reaches 0%) condition occurs.
•
Warn & Pause. This setting is similar to the Warn & Continue selection
with one exception. When a ribbon low condition is reached the printer will
still display the "RIBBON UNDER XX%/Change RBN Soon" warning
message, however the printer will stop printing. This is meant to get the
user's attention. To resume printing the user must press the ONLINE/
Clear key.
NOTE: Printing will only stop on the first occurrence of a ribbon low condition.

DIAGNOSTICS

DIAGNOSTICS
(from page 50)
Printer
Tests
Shift Recycle*
All E's
E's + TOF
All H's
All Underlines
All Black
Shuttle Slow
Shuttle Fast
Shuttle Only
Phase Printer
Paperout Adj.
Burnin Test
Print Error Log
Clear Error Log
1
Adapter Test
1
Ethernet Test
Acoustics
Dice 5
Prnt Ribbon Log
Once the user clears the warning message, subsequent warnings will
display the warning message but printing will continue.
Test Width Paper Out
Dots
Full Width* 76 dots*
80 col. (40-112)
Page Format Submenu
* = Factory Default
1
If installed
System Print
Memory Statistics
32 Megabytes On: 127.7 Hrs.
Print: 8.3 Hrs
Print Strokes:
1370097
Print Lines:
106441
11 inch Pages:
4265
DIAGNOSTICS
107