Test Options Menu - High End Systems intellaspot XT-1 User Manual

CHAPTER 3
Menu System

Test Options Menu

This menu lets you Home the fixture, test the mechanical
functions, control the Lamp, set Display brightness level,
and manage Encoder functions. You can also perform
Motor Setup and Copy Boot Code procedures when
needed during fixture maintenance.
To Enter the Test Options Menu:
1. Press the Menu button to unlock the menu system or
to move back up the system to the top level menus.
2. Use the left and right arrows on the Center button to
scroll to the
Test Options Menu
Enter button to select. The screen will display the
TEST icon in the screen banner and the first option of
the next menu level.
Homing the Fixture
The intellaspot XT-1 fixture automatically homes
whenever it is turned on. To manually home the fixture:
1. Unlock the menu system and navigate to the
option you will see is
2. Press the Enter button to select.
3. Use the up and down arrows on the Center button to scroll to
4. Press the Enter button to select. The fixture will begin homing.
Lamp State
The setting in the
Lamp State
you manually turn the lamp
change the lamp state:
1. Unlock the menu system and navigate to and select
the
Test Options Menu
2. Use the right and left arrows on the Center button
to scroll to the
Lamp State
Enter button to select. The display will show the
current lamp state as either
3. Use the up and down arrows on the Center button to scroll to the other state and press the
Enter button to select.
Note: If you are unable to change the state, check the Information Menu (see Lamp
Status on page 39).
32
and press the
. The default safe option is
Home Fixture
menu lets
Test Options
or . To manually
On Off
as shown above.
option and press the
or .
On Off
Test Options Menu
DMX [ ]
Home Fixture:
No
DMX [ ]
Test Options Menu
.
No
Yes.
Lamp State:
On
DMX [ ]
as shown above. The first
intellaspot XT-1 User Manual
TM