Lamp Strike Mode - High End Systems intellaspot XT-1 User Manual

CHAPTER 3
Menu System

Lamp Strike Mode

This menu option lets you choose when the lamp will
strike (turn on).
To set the
Lamp Strike Mode
1. Navigate to and select the
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center
button, scroll to
Lamp Strike Mode
3. Using the up and down arrows on the Center
button, choose
Auto
data is received,
the lamp when you send a Lamp On command from the DMX console.
4. Press the Enter button to select.
Data Source
Every fixture automatically defaults to DMX as a data
source. If your fixture is equipped with a WIFI or other
NETWORK card, you can use the menu option to select
that as a data source. The display screen will show any
connection options installed on your fixture.
To change the data source:
1. Navigate to and select the
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center
button, scroll to
Data Source
will be displayed.
DMX
3. Use the up and down arrows on the Center button to scroll to
Art-Net) and press the Enter button to select.
30
:
Set Parameters Menu
.
to strike the lamp as soon as
to strike the lamp as soon as power is applied, or
Power On
Set Parameters Menu
and press the Enter button to select. The default data source
Lamp Strike
,
Mode: Auto
DMX [ ]
Date Source: DMX
,
or
WiFi NETWORK
intellaspot
to strike
Manual
(for example,
XT-1 User Manual
TM