Test Menu (Test); Homing The Fixture (Home); Lamp Test (Lamp); Changing Boot Codes (Boot) - High End Systems trackspot Bolt User Manual

Test Menu (TEST)

The Test menu allows you to manually home the fixture and perform fixture self tests to
determine the origin of mechanical problems.

Homing the Fixture (HOME)

This menu item allows you to manually home the fixture. To remotely home the fixture using a
DMX console, see Control Settings on page 36. To manually home the fixture:
1. Press and hold <Menu> until AddR appears on the LED display.
2. Scroll to the TEST menu. Press <Enter> to select.
3. Scroll to the HOME option (this will be the first option displayed).
4. Press <Enter> to select.
5. HOLD will be displayed.
6. Press <Enter> to select. The fixture will begin homing.

Lamp Test (LAMP)

The Lamp Test menu let you manually turn the LED light engine on or off. To access the lamp
function:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the TEST field and press <ENTER> to select.
3. Using the up and down buttons, scroll to the LAMP field and press <ENTER>.
4. Using the up and down buttons, scroll to ON or OFF.
5. Press <Enter> to store.

Changing Boot Codes (BOOT)

When the trackspot Bolt fixture is uploaded, occasionally it is necessary to include a new boot
code with the latest software. This is apparent when bOOT dIff appears in the display. To accept
and store the new boot code:
1. Hold <MENU> until the display changes to AddR.
2. Using the up and down buttons, scroll to the TEST field and press <ENTER>.
3. Using the up and down buttons, scroll to the bOOT field and press <ENTER>. The fixture
will display dONE, RST, and home.
Caution: Do not remove power from the fixture during the
trackspot Bolt User Manual
®
above procedure.
CHAPTER 3
The Menu System
23