Lamp Life Limit - High End Systems intellaspot XT-1 User Manual

Lamp Life Limit

Use this menu option to display the warning message
when the current lamp hours reach the
Lamp Life Error
rated lamp life. When the
enabled, the fixture tracks the number of hours the lamp
is on. As the lamp life approaches it's limit, the fixture
displays an error message. At close to the lamp life limit,
the lamp shuts off, and the fixture will not strike until the
lamp is replaced and the lamp hours are reset to 0. See
Replacing the Lamp on page 43 and Lamp HR/Strike
Reset on page 39.
To enable the
Lamp Life Limit
1. Navigate to and select the
2. Using the left and right arrows on the Center button, scroll to
3. Using the up and down arrows on the Center button, choose the
Enter to select.
Lamp Level
This menu option lets you choose the lamp power economy mode setting operating the lamp at
700W or the standard 850W mode.
To change the
Lamp Level
1. Navigate to and select the
2. Using the up and down arrows on the Center button, scroll to Lamp Level.
3. Using the up and down arrows on the Center button, choose the
Standard Mode
Data Loss Timeout
This menu option determines how the fixture will react in
the event of DMX data loss. Set the shutter to stay open
until shutdown or to close one second after data loss.
To set the
Data Loss Timeout
1. Navigate to and select the
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center button,
scroll to
Data Loss Timeout
3. Using the up and down arrows on the Center button,
choose to keep the shutter open until shutdown, or
Long
after data loss and press the Enter button to select.
intellaspot XT-1 User Manual
TM
Lamp Life Limit
parameter:
Set Parameters Menu
:
Set Parameters Menu
and press Enter to select.
:
Set Parameters Menu
.
parameter is
Lamp Life
Limit: Disabled
DMX [ ]
DMX [ ]
, (see Set Parameters Menu on page 27).
, (see Set Parameters Menu on page 27).
Data Loss
Timeout: Short
,
DMX [ ]
Short
CHAPTER 3
Menu System
.
Lamp Life Limit
option and press
Enable
or the
Econo Mode
to close the shutter 1 second
29