Pan/Tilt Swap - High End Systems intellaspot XT-1 User Manual

CHAPTER 3
Menu System

Pan/Tilt Swap

This option swaps the pan motor and tilt motor operation
to coordinate movements between fixtures on a link
mounted perpendicular to each other.
To swap Pan and Tilt:
1. Navigate to and select the
(see Set Parameters Menu on page 27).
2. Using the left and right arrows on the Center button, scroll
to
Pan/Tilt Swap
will be displayed.
3. Use the up and down arrows on the Center button to scroll to
to swap pan and tilt or
Enabled
setting and press the Enter button to select.
Pan Invert
This menu option inverts the direction of
the pan motor to coordinate movements
between fixtures mounted opposite each
other horizontally.
To invert the fixture's Pan motion:
1. Navigate to and select the
2. Using the left and right arrows on the Center button, scroll to
( or
Enabled Disabled
3. Use the up and down arrows on the Center button to scroll to
invert Pan movement or
Enter button to select.
Tilt Invert
This menu option inverts the direction of the tilt motor to coordinate movements
between fixtures on a link facing each other vertically.
To invert the fixture's Tilt motion:
1. Navigate to and select the
on page 27).
2. Using the left and right arrows on the Center button, scroll to
The current state (
3. Use the up and down arrows on the Center button to scroll to
invert Tilt movement or
Enter button to select.
28
Set Parameters Menu
. The current state (
Enabled
Disabled
Set Parameters Menu
) will be displayed.
to restore default setting and press the
Disabled
Set Parameters Menu
or
Enabled Disabled
to restore default setting and press the
Disabled
,
or )
Disabled
to restore default
(see Set Parameters Menu on page 27).
(see Set Parameters Menu
) will be displayed.
. The current state
Pan invert
to
Enabled
.
Tilt Invert
to
Enabled
intellaspot XT-1 User Manual
TM