Color Parameters - High End Systems intellaspot XT-1 User Manual

MSpeed values control the pan and tilt motion for intellaspot XT-1 fixtures by default, see MSpeed
(Motor Speed) on page 55. To control the Pan and Tilt parameters with DMX controller
crossfading, set Pan/Tilt MSpeed off in the Control parameter (see Control on page 57).
Note: Optical encoders for pan and tilt instantly correct the fixture's position if the
fixture is jarred from its programmed position. If a physical obstruction
prevents the fixture from correcting its position, the fixture "times out" to
prevent wear on the motors. If the fixture has timed out, remove the
obstruction and home the fixture to return it to normal operation.

Color Parameters

CMY color mixing is achieved using three color wheels (Cyan, Magenta, and Yellow). A CTO wheel
lets you adjust color temperature. A fixed color wheel provides an additional five factory selected
dichroic color wedge filters.
Color Mix Function
This parameter determines how the cyan, magenta, and yellow color wheels move. The Color
Function values can be enabled in either full speed (controller crossfading the wheel positions), or
MSpeed (MSpeed control of the wheel motor). For more information on MSpeed, see MSpeed
(Motor Speed) on page 55.
Color
Function
Allows color wheel movement from open (white) to saturated color (permits a smaller
Pure Mix
"step" between color wheel positions for color crossfades).
Allows exact positioning of the color wheel from white to full color to white over the full
Continuous revolution of the wheel. Using this feature allows you to split the light beam into two
distinct colors.
Puts all three (cyan, magenta, and yellow) color wheels in spin mode. Wheel Spin
Spin
speed, direction, or fixed position can be set individually on CMY channels.
Uses only the color-mixing portion of the cyan, magenta, and yellow color wheels to
Cycle cycle colors from red to green to blue at variable speeds (rate set by cyan DMX
channel).
Performs a pseudo-random color chase of 12 factory-selected colors using the cyan,
Random
magenta, and yellow color wheels at variable speeds (rate set by cyan DMX channel).
Blink Closes then reopens the shutter between indexed color changes.
intellaspot XT-1 User Manual
TM
Description
CHAPTER 4
Fixture Programming
43