Control - High End Systems intellaspot XT-1 User Manual

Control

The Control parameter allows remote control of Pan and Tilt MSpeed, Display, Homing, Lamp and
Shutdown.
Note: To access all control settings (except for Pan & Tilt MSpeed Off), first
select a control channel value, then set the Shutter channel to "0."
Control Parameter Setting
Safe
Pan & Tilt MSpeed Off
Display/LEDs Off
Display/LEDs Bright
Home All
Lamp On
Lamp Off
Shutdown
intellaspot XT-1 User Manual
TM
Disables all Control settings for normal operation
Sets Pan & Tilt MSpeed off
Turns display and status LEDs illumination off
Turns display and status LEDs illumination on
Remotely homes the fixture
Remotely restrikes the fixture's lamp
Remotely extinguishes the fixture's lamp
Remotely shuts down the fixture. When a fixture is shut down, the
lamp is extinguished, power to the motors is disabled, and the display
reads . If a fixture is in shutdown mode, the fixture must be
Shutdown
homed to bring it back into operation.
Fixture Programming
Description
CHAPTER 4
57