Fixture Mode Menu - High End Systems intellaspot XT-1 User Manual

Fixture Mode Menu

The Mode menu crossloads software from one fixture to
other intellaspot XT-1 fixtures on the link.
To enter the Mode menu:
1. Press the Menu button to unlock the menu system
or to move back up the system to the top level
menus.
2. Using the left and right arrows on the Center
button, scroll through the top level to
and press the Enter button to select.
Mode Menu
The MODE icon will be displayed in the banner with
the next level of configuration options below.
Crossloading Fixture Software
A fixture running a newer software version can load the
new software to all other intellaspot XT-1 fixtures on the
link using the
Crossload Firmware
To
Crossload Firmware
intellaspot XT-1 fixtures on the link:
1. Disconnect or bypass any controllers, serial data distributors, data line optoisolators, and any
fixtures using RS-422 communications (such as Dataflash
devices will block communication between the crossloading fixture and any other intellaspot
XT-1 fixtures on the link.
2. On the crossloading fixture only, unlock the menu system and navigate to the
(see above) and press the Enter button to select.
Menu
3. Use the left and right arrows on the Center button to scroll to
4. Use the up and down arrows on the Center button to scroll to the
Enter button to store. The fixture will upload its software to all other intellaspot XT-1 fixtures
on the link.
When the crossload has finished successfully,
display of the crossloading fixture, and all other fixtures will automatically home.
Note: If a new boot code was included with the latest software, the fixture
displays a BOOTDIFF error when it returns to the locked mode of the
menu system. To correct the boot code, copy the new boot code to
each fixture (see Copying the Boot Code on page 33).
intellaspot XT-1 User Manual
TM
Fixture
menu option.
from one fixture to all
Crossloading Complete
Fixture Mode Menu
DMX [ ]
Crossload
Firmware: No
DMX [ ]
®
AF1000 xenon strobes). These
Crossload Firmware
option and press the
Yes
will appear briefly in the
CHAPTER 3
Menu System
Fixture Mode
.
31