Shutting Down The Fixture - High End Systems intellaspot XT-1 User Manual

Shutting Down the Fixture

A DMX controller can shut down the fixture remotely with the Shutdown option in the Control
Channel or you can simply disconnect from power. The intellaspot XT-1 fixture automatically
shuts down in the event of DMX data loss longer than five minutes.
Placing Fixture in Road Case
Before shipping an intellaspot XT-1 fixture, lock the pan and tilt
position so the fixture does not move during transit.
To lock the fixture:
1. Orient the fixture head for packing in the road case and secure
both the pan lock located on the base and the tilt lock on the
yoke arm.
Note: This is the only pan position that locks.
2. Gently move the fixture head and yoke to verify that both pan and tilt positions are locked
in place.
3. Place the intellaspot XT-1 fixture in the road case as shown for shipping.
intellaspot XT-1 User Manual
TM
CHAPTER 2
Setup and Configuration
15