Troubleshooting - High End Systems intellaspot XT-1 User Manual

Troubleshooting

System State LEDs
Five labeled LEDs on the display panel indicate the following system activity:
Name Color State
On
Status Green
Off
On
Lamp White Off
Blinking
CPU Amber Steady
PSU Blue Steady
5V Red Steady
Board LED States
LEDs located on the CPU, 2-phase, 3-phase, and Data Communication boards help you
troubleshoot the unit.
Location LED #
LD1-LD4
2-phase
board
LD5
intellaspot XT-1 User Manual
TM
Problem
?
No (45 sec On/1.4 sec.Off) Running normal motion-control code
Yes Fixture code not running
No Lamp is on
Lamp is off
Maybe
If the Status Lamp is also off, Check that the harness is connected
from the HD1 on the LED status board to HD8 on the Tilt board
No Lamp is either cooling down or in a indeterminate state
No Fixture is running code
No 40V Power Supply is running
No Fixture's Motion Control system is receiving power
State
Green
Yellow
Flashing red
Infinitely flashing red
Red
Flashing red and green
Sporadically flashing
green& yellow
OFF
Green
Dim green
OFF
General Maintenance and Troubleshooting
Description
Problem?
S1-S4 sensor open
No
No S1-S4 sensor closed
No Board is ready to initialize
Yes Board not receiving data
Yes Board not receiving data
Addressing screw(s) missing from board
Yes
2 boards are addressed the same. (Move
Yes
addressing screw to appropriate location)
Yes Board not receiving power
No Receiving data
Yes Board not receiving data
Board not receiving power
Yes
CHAPTER 5
Description
73