Shutter And Lamp Parameters - High End Systems intellaspot XT-1 User Manual

Shutter and Lamp Parameters

Shutter/Lamp Function
The Lamp Function parameter) modifies the Shutter parameter and Dim parameter functions to
enhance and expand the range of effects available on the intellaspot XT-1 fixture including Light
Burst™ effects, lightning strikes and Electronic Dimming™ effects.
The Light Burst™ effect boosts the Lamp above the 850 Watt level for the specified period of time.
Boosting to white ends with the shutter open; boosting to black closes the shutter. Boosting is
also used to created Lightning effects with the Dim channel scaling the overall brightness.
The intellaspot XT-1 fixture supports Electronic Dimming™ effects as well as mechanical dimming
and a combination of both. Electronic Dimming™ effect works by lowering the lamp power.
Electronic Dimming alone will not go to black.
Shutter/Lamp Function
Parameter Setting
Normal Shutter Functions
Random Random Strobe
Synchronous Random Strobe
Lamp Functions
Shutter
The Shutter parameter determines the way the shutter is opened and closed. In addition to the
normal functions, the Lamp Control modifies the Shutter parameter to create Lamp Burst,
Lightning, and Electronic Dimming effects. The following table describes the interaction between
the Lamp Function, Shutter and Dim Channels
Lamp Function Setting
Normal Shutter Functions
Random Random Strobe
Synchronous Random Strobe
intellaspot XT-1 User Manual
TM
Opens and closes shutter flags in the optical path
Strobes beam using the shutter flags at random intervals
Synchronizes random strobing for all intellaspot XT-1 fixtures using the
same DMX controller
Uses lamp Dimming with the Shutter to produce strobing, Light Burst,
lightening strikes and Electronic Dimming effects.
Shutter Parameter Options
Close shutter
Set strobe rate from slow to fast. Mechanical shutter strobing
is replaced with electronic strobing at higher frequencies.
Open shutter
Description
CHAPTER 4
Fixture Programming
53