Test - High End Systems SolaHyBeam 2000 User Manual

Key Lock
With this function you can activate the automatic keylock status. If this function is activated, the keys
will be locked automatically after exiting the edit mode for 15 seconds. Continue pressing the [MENU]
key for 3 seconds if you do not need this function.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Set" is
displayed. Press ENTER, the display will show "Set". Tap the <Up/Down>button until the display
will show "Disp.Setting". Press ENTER, the display will show "Disp.Setting".
2． Press <Up/Down>, the display will show "Key Lock".
3． Press< ENTER>, the display will show "Key Lock".
4． The display show "OFF", Press <Up/Down>, the display will show "ON".
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Temperature C/F
With this function, Display the temperature for Celsius or Fahrenheit.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Set" is
displayed. Press ENTER, the display will show "Set".
2． Press <Up/Down>, the display will show "Temp. C/F".
3． Press< ENTER>, the display will show "Temp. C/F".
4． The display show "Celsius", Press <Up/Down>, the display will show "Fahrenheit".
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Reset Default
With this function, you can select restore factory set for ON or OFF, the default is OFF.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Personality"
is displayed. Press ENTER, the display will show "Personality".
2． Press <Up/Down>, the display will show "Reset Default".
3． Press< ENTER>, the display will show "Reset Default".
4． The display show "OFF", Press <Up/Down>, the display will show "ON".
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.

Test

Home
With this function you can reset the device via the Control Board. You can select the different reset
functions by turning the encoder.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Test" is
displayed. Press ENTER, the display will show "Test".
2． The display show "Reset All", Press <Up/Down>, the display will show "Reset Pan&Tilt", "Colors",
"Gobos", "Others".
3． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
Test channel
With this function you can test each channel on its (correct) function.
1． Tap <MODE/ESC>button，access the main menu，Tap the <Up/Down>button until "Test" is
displayed. Press ENTER, the display will show "Test".
2． Press <Up/Down>, the display will show "Test Channel".
3． Press< ENTER>, the display will show "Test Channel".
4． The display show "Pan Moving" first channel, Press <Up/Down>, can choose other channel.
5． Press <ENTER> to confirm or press <MODE/ESC> to return to the main menu.
SolaHyBeam 2000 User Manual
32
v1.3