Setup Motors - High End Systems intellaspot XT-1 User Manual

CHAPTER 3
Menu System

Setup Motors

This option is used when calibrating flag motors in
Production Homing, see Production Homing on page 51.
To run the motor setup routine:
1. Navigate to and select the
(see Test Options Menu on page 32).
2. Using the left and right arrows on the Center
button, scroll to the
the Enter button to select.
Use the up and down arrows on the Center button to
scroll to and press the Enter button to select and start the motor setup routine.
On
Encoders
Encoders maintain the Pan and Tilt position of the
fixture, but may need to be disabled to perform certain
test and maintenance procedures like optimizing a new
lamp.
To disable encoders:
1. Navigate to and select the
(see Test Options Menu on page 32).
2. Using the left and right arrows on the Center
button, scroll to the
Enter button to select. The default option is
3. Use the up and down arrows on the Center button to scroll to
to disable the pan and tilt encoders.
Code Menu
This option is for factory use only in debugging situations.
34
Test Options Menu
option and press
Setup Motors
Test Options Menu
option and press the
Encoders
Setup Motors:
,
Off
DMX [ ]
Encoders:
On
,
DMX [ ]
.
On
and press the Enter button
Off
intellaspot XT-1 User Manual
TM