Lw3 Commands - Quick Summary - Lightware VINX-120-HDMI-ENC User Manual


  
5. Programmers' Reference

5.15. LW3 Commands - Quick Summary

System Commands
Querying the Product Name
5.6.1
/.ProductName
Setting the Device Label
5.6.2
/SYS/MB.DeviceLabel
Querying the Serial Number
5.6.3
/.SerialNumber
Querying the Firmware Version
5.6.4
/SYS/MB.FirmwareVersion
Querying the Core Version
5.6.5
/SYS/MB.CoreVersion
Resetting the Device
5.6.6
/SYS:reset()
Restoring the Factory Default Settings
5.6.7
/SYS:factoryDefaults()
Network Configuration
Querying the DHCP State
5.7.1
/MANAGEMENT/NETWORK.DhcpEnabled
Changing the DHCP State
5.7.2
/MANAGEMENT/NETWORK.DhcpEnabled
Querying the IP Address
5.7.3
/MANAGEMENT/NETWORK.IpAddress
Setting a Static IP Address
5.7.4
/MANAGEMENT/NETWORK.StaticIpAddress
Querying the Subnet Mask
5.7.5
/MANAGEMENT/NETWORK.NetworkMask
Setting a Static Subnet Mask
5.7.6
/MANAGEMENT/NETWORK.StaticNetworkMask
Operation / Path
Operation / Path
VINX-1x0-HDMI Extenders – User's Manual
Querying the Gateway Address
5.7.7
/MANAGEMENT/NETWORK.GatewayAddress
Setting a Static Gateway Address
5.7.8
/MANAGEMENT/NETWORK.DhcpEnabled
Encoder-related Commands
Setting the Video Quality Mode
5.8.4
/MEDIA/VIDEO/I1.HdcpState
Setting the HDCP State
5.8.6
/MEDIA/VIDEO/I1.HdcpEnable
Decoder-related Commands
5.9
/MEDIA/VIDEO/I1.HdcpState
Querying the Resolution of the Input Video Signal
5.8.2
/MEDIA/VIDEO/I1.Resolution
Querying the Video Quality Mode
5.8.3
/MEDIA/VIDEO/QUALITY.QualityMode
Setting the Video Quality Mode
5.8.4
/MEDIA/VIDEO/QUALITY.QualityMode
Decoder-related Commands
Querying the Resolution of the Output Video Signal
5.9.1
/MEDIA/VIDEO/O1.Resolution
Querying the Scaling Mode of the Output Video Signal
5.9.2
/MEDIA/VIDEO/O1/SCALER.ScalingMode
Setting the Scaling Mode of the Output Video Signal
5.9.3
/MEDIA/VIDEO/O1/SCALER.ScalingMode
Setting the Resolution of the Output Video Signal
5.9.4
/MEDIA/VIDEO/O1/SCALER.OutputResolution
Operation / Path
Operation / Path
Operation / Path
38