sauter FL series Instruction Manual page 16

- Apply 100% of the instrument's capacity load onto the support(s) for compression.
- Press UP, DOWN, RIGHT ARROW or LEFT ARROW key to adjust compression
gain until the gauge displayed max capacity count.
- Press ENTER key to store the counts for full-scale compression
6) After your successful calibration, remove any accessories, which have been
mounted to the gauge and place the gauge on its back on a level surface.
Go to TENSION GAIN menu page, press ZERO key to store the original Offset, Date
and Time of calibration and clear the Overload Counter.
Annotation:
To have a look at the CE Declaration of Conformity, please click onto the following
link: https://www.kern-sohn.com/shop/de/DOWNLOADS/
16 FL-BA-e-1714