Fl-Ba-E - sauter FL series Instruction Manual

Calibration
1. Turn the gauge on
2. Go to main menu by pressing the MENU key and press the UP and DOWN key to
move the cursor to point to CALIBRATION and press ENTER key, then the ENTER
PASSWORD page will be displayed.
ENTER PASSWORD
4 DIGIT
PASSWORT : 0000
Fig. 1 Enter Password Page
* Permanent Password= 7780
Press UP and DOWN to change the numerical, press and hold to scroll change.
Press LEFT and RIGHT to change the digit, press and hold to scroll change digit.
Press ENTER key to accept your password. If your password is correct, the display
will show the Calibration menu page; if not, the display will return to main menu page.
Fig. 2 Calibration Menu Page
3. Select the correct load cell capacity for the gauge. To set load capacity, press UP
and DOWN key to move the cursor to point to MAX CAPACITY and press ENTER
key. Max capacity menu page will be displayed.
Fig. 3 Max Capacity Menu page 1
Fig. 4 Max Capacity Menu page 2
14

FL-BA-e-1714