Prox 800 System Components; Prox 800 Production Printer; Prox 800 Printer - Outside View - 3D Systems ProX 800 User Manual

Hide thumbs Also See for ProX 800:
Table of Contents

Advertisement

ProX 800 SYSTEM COMPONENTS

9 
The ProX 800 SLA System is comprised of many subcomponents which all work together to produce the highest quality printed
parts on the market. Below is an overview of these components.

ProX 800 PRODUCTION PRINTER

This section will introduce you to the locations and component descriptions of the ProX 800 printer. There are two views: an
outside view and an inside view.

ProX 800 Printer - Outside View

Light Stack:
The light stack consists of three
A
lights: red, yellow and green. The lights reflect
what state the machine is in at any given time.
Refer to the section
25
for light stack meanings.
Printhead:
The printhead is located at the
B
top of the machine, beneath the frame panel.
Refer to the section,
page 23
for further information.
Emergency Stop (E-Stop):
C
located on the side panel above the touch
screen. The E-Stop immediately disables all
motion controls and the laser, rendering them
safe. After being pressed, it remains in the
closed state until it is manually returned to
the open state by pulling the red knob and
turning it clockwise. An E-Stop is also located
inside the print chamber.
User Interface (UI):
D
touchscreen which allows the user to interface
with the printer. The
installed on the touchscreen enables the user
to view and adjust the print parameters used
to print a part as well as control the various
hardware components of the printer.
System Status Lights:
E
indicate critical information regarding the
system. See the section,
page 24
for descriptions of each indicator.
Door Handle Location:
F
cannot be opened anytime the system is enabled. The system can be disabled by clicking
pressing an E-Stop button.
3D Systems, Inc.
"Light Stack" on page
"Printhead Overview" on
This switch is
This is the control
Print3D Pro
software
System Status Lights
"LED Indicators" on
To open the door, pull it by the handle-like grips at the edge of the door panel. The door
A
B
17
F
Unlock Doors
on the UI or by
C
D
E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents