Prox 500 System Components; Prox 500 User Interface - 3D Systems ProX 500 User Manual

ProX 500 SYSTEM COMPONENTS

ProX 500 User Interface

The User Interface, located on the front panel of the printer, consists of a touchscreen and the system status LED indicators . An E-Stop
is located above the touchscreen .
Emergency Stop:
A
renders them safe . However, some surfaces may remain hot and care should be taken when handling them . After being
pressed, it remains in the closed state until it is manually returned to the open state .
The user controls the system using a touchscreen located on the front panel .
B
User Interface:
Buttons, Indicators, USB Ports:
C
Chamber Lights: This button turns the chamber lighting on or off
LED Indicators: The LED indicators under the touchscreen indicate the system's power and safety status . Each indicator
operates as follows:
• "Laser" Blue LED
3D Systems, Inc.
C
This switch, located above the touchscreen, immediately disables all hazardous machine functions or
A
B
12