Table 3: Overview Basic Settings Of Dp-Parameters - KEB COMBIVERT G6 Instructions For Use Manual

OPeRATOR PARAMeTeR
os18 safety software date
Value Meaning
Software date of installed safety module.
The year is displayed before the comma, month and day are after that.
0,0000...
• 2014,0713 means 13.07.2014.
9999, 3112
If no safety module is installed, the value "0: no safety functionality" is displayed.
os19 safety software version
Value Meaning
Software version of installed safety module.
0.0.0.0... Software version of the control board.
255.255.255. 255
• Example 1.4.1.2
If no safety module is installed, the value "0: no safety functionality" is displayed.
os20 safety signals state
Bit Function
This parameter displays the current status of the safety module. This parameter is only visible via bus if
"invisible parameter" is set in COMBIVIS.
0...1 Error STO
2...3 Mod
Feedback
4...5 safe control release
6...7 Power unit in operation
os21 safety information
Value Meaning
0 ...65535 This parameter is only visible via bus if "invisible parameter" is set in COMBIVIS.
os23 current PU ID
Value Meaning
0...65535 Displays the ID of the detected power unit. This parameter is only visible via bus if "in-
visible parameter" is set in COMBIVIS.
os28 QS number OS
Value Meaning
0...65535 Displays the ID of the detected power unit. This parameter is only visible via bus if "in-
visible parameter" is set in COMBIVIS.
Value Meaning
0 no safety functionality
1 Error STO
2 STO OK
4 Modulation Feedback set
8 Modulation Feedback not set
16 ST is set
32 ST is not set
64 Power unit in operation
128 PU alive not set
0x2092
0x2093
0x2094
0x2095
0x2097
0x209C
23