Customer Parameters (Cp Parameter) - KEB COMBIVERT G6 Instructions For Use Manual

Hide thumbs Also See for COMBIVERT G6:

Table of Contents

CUSTOMeR PARAMeTeRS (CP PARAMeTeR)

6 Customer parameters (CP Parameter)

If the development phase of a machine is complete, usually only a few parameters to

adjust or control of the inverter are needed. In order to simplify the handling and cos-

tumer documentation and to increase security against unauthorized access, there is a

possibility to create an own user interface and the CP parameters. There are 49 param-

eters (CP00 CP48 ...) available, of which 48 (CP01 CP48 ...) can be freely assigned.

The CP00 parameter is fixed.

The operator can be adjusted so that it displays the customer parameters directly after

switching on.

How to set the customer parameter menu is described in Chapter 21 of the

programming manual G6 "00G6NDA-0020" "Defining CP parameters".

Table of Contents