KEB COMBIVERT G6 Instructions For Use Manual page 20

OPeRATOR PARAMeTeR
os01 password OS
Value Meaning
-1...-9 Displays the current password level of the operator. This parameter is a mapping of the
parameter Ud01. This parameter is only visible via bus if "invisible parameter" is set in
COMBIVIS.
os02 software date OS
Value Meaning
0,0000... Software date of the control board.
9999,1231
• The year is displayed before the comma, month and day are after that. 2014.0513
means 13.05.2014.
os03 software version
Value Meaning
0.0.0.0... Software version of the control board.
255.255.255. 255
• Example 1.4.1.2
os04 diag error count
Value Meaning
0...255 Specifies the number of errors occurred on the diagnostic interface.
os05 diag response delay time
Value Meaning
0...126 ms Sets the minimum response delay time for requests on the diagnostic interface.
os06 baud rate diag
Value Meaning
0...8 Default transfer speed on the diagnostic interface.
0 1.2 kBit/s
1 2.4 kBit/s
2 4.8 kBit/s
3 9.6 kBit/s
4 19.2 kBit/s
5 38.4 kBit/s (standard)
6 55.5 kBit/s
7 57.6 kBit/s
8 100 kBit/s
os07 node ID
Value Meaning
0...239 This parameter specifies the inverter address for the diagnostic interface (DIN 66019).
The parameter is an image of the system parameter Sy06.
20
0x2082
0x2082
0x2083
0x2084
0x2085
0x2086
0x2087