Operating Rfid/Scanner Modules; Connecting And Disconnecting Tethered Peripherals - Psion Teklogix 7535 G2 User Manual

Chapter 3: Getting To Know Your 7535 G2

Operating RFID/Scanner Modules

3.6.7

Operating RFID/Scanner Modules

For detailed information on the RD7950 UHF RFID Reader please refer to the RD7950
UHF RFID Reader Quick Reference Guide (P/N 8000056).
Important: For successful reads, the distance from the hand-held to the RFID tag
3.7

Connecting And Disconnecting Tethered Peripherals

Tethered peripherals such as scanners and printers connect to the hand-held computer with a
quick release, circular connector. When a peripheral is connected to the hand-held, the unit
detects the peripheral and loads the necessary drivers for it. An icon in the taskbar at the
bottom of the screen provides a visual representation of the peripheral and indicates that it is
ready for operation. To attach the peripheral to the round, tether port on the side of the unit:
• Insert the barrel of the plug into the tether port and rotate slowly until it clicks into place.
The red dot on the port and on the connector should be aligned.
Figure 3.4 Attaching The Cable To The Tether Port
To remove the peripheral:
• Grasp the shell of the plug, and pull it back gently to unlock and release the connector.
62 Psion Teklogix 7535 G2 Hand-Held Computer User Manual
varies depending on the type of tag.