Psion Teklogix 7535 G2 User Manual page 27

Warnings To Users
This product is a Class I/Class II laser product according to CDRH 21 CFR 1040.10 and
1040.11 and Class1/Class 2 laser product according to IEC 60825-1 Ed. 2.0.
The SE1200 ALR has an maximum radiated power less than 1.4 mW; according to EN
60825-1: 2001 it is classified as a Class 3B laser product.
Laser Warnings
Important: For your own safety, it is critical that you comply with the following
warnings.
• Do not look into the laser beam or point the beam at people or animals
• Using controls or adjustments, or performing procedures other than those specified
herein may result in hazardous radiation exposure.
• The use of optical instruments (magnification devices) with this product will increase
eye hazard.
• DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE. Operating Psion Teklogix
equipment where explosive gas is present may result in an explosion.
• DO NOT REMOVE COVERS OR OPEN ENCLOSURES. To avoid injury, the equip-
ment covers and enclosures should only be removed by qualified service personnel. Do
not operate the equipment without the covers and enclosures properly installed.
Aperture
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter : Approvals And Safety Summary
A label is affixed below
the aperture.
xxi-