Code 128; C.5.3 Code 128 - Psion Teklogix 7535 G2 User Manual

Appendix C: Bar Code Settings
Non-Decoded Scanners

Code 128

C.5.3 Code 128
Enabled
Set this parameter to on to enable "Code 128" or off to disable it.
Include Sym
Setting "Include Sym" to on causes the group separator(s) and start code contained in this
type of bar code to be displayed on the screen.
Note: This option is available only when 'EAN/UCC 128' is selected.
Variations
When using Code 128, you can choose the bar code variation the scanner will recognize.
The options available are Standard, UCC 128 and EAN/UCC 128.
• Double-tap on Variations to display a dialog box listing your options.
• Tap on a variation to highlight it, and then tap on OK.
If you choose None, a check is not executed.
Standard
Enable Standard if "Code 128" is desired.
UCC 128
UCC 128 is a variation of "Code 128".
EAN/UCC 128
To successfully scan this type of bar code, "EAN/UCC 128" must be enabled. "EAN/UCC"
bar codes include group separators and start codes.
Transmit Code ID Char
A code ID character identifies the scanned bar code type. In addition to any single character
prefix already selected, the code ID character is inserted between the prefix and the decoded
symbol.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
C-58 Psion Teklogix 7535 G2 Hand-Held Computer User Manual