5.11.2 Communities
The Communities tab allows you to limit access to SNMP-managed devices to those SNMP
Managers with matching "community names", as specified by RFC 1157.
Enable SNMP
Tapping the checkbox Enable SNMP allows the device to respond to SNMP queries and to
send Traps. After enabling this option and rebooting the device, the SNMP Agent will auto-
matically start up. To disable this feature, remove the checkmark from the checkbox.
5.11.2.1 Adding A Community
•
Choose the Add button to add a new 'community'.
Name
The value assigned here is the name assigned by the network administrator to the set of
devices to which this managed node belongs.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Chapter 5: Configuration
Communities
153