Restoring Default Settings - Psion Teklogix 7535 G2 User Manual

Chapter 5: Configuration
Bar Codes

Restoring Default Settings

• For the Symbol LS3408 decoded scanner, refer to the programming guide supplied with
your scanner.
• For PowerScan® (PSC) decoded scanners, refer to the PowerScan Programming
Guide.

5.10.1.2 Restoring Default Settings

If you want to restore the factory defaults after making changes, the defaults can be applied
to a selected parameter, sub-tree of parameters or all scanner parameters.
• Press and hold the stylus on a symbology (e.g., Code 128) to display a pop up a menu.
• Choose Default subtree to reset only the parameters in the symbology you selected, or
choose Default all settings to reset all scanner parameters to default settings.
To reset a single parameter to its default setting:
140 Psion Teklogix 7535 G2 Hand-Held Computer User Manual