Discrete 2 Of 5; Rss Code (Reduced Space Symbology); C.2.16 Discrete 2 Of 5 - Psion Teklogix 7535 G2 User Manual

C.2.16 Discrete 2 of 5

Enabled
Set this parameter to on to enable "Discrete 2 of 5".
Set Length L1 And Set Length L2
Lengths for "Discrete 2 of 5" can be set for Any length, Length within a range, One discrete
length or Two discrete lengths. The length of a code refers to the number of characters (i.e.,
human readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be recognized by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 1 to 12.
Length Restriction
Refer to "Length Restriction" on page C-14 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page C-15 for details.
C.2.17 RSS Code (Reduced Space Symbology)
Enable
Setting any of these parameters to on enables "2D RSS Code" scanning capability.
Enable RSS-14 (Reduced Space Symbology)
RSS-14 code can be either purely linear or split in half with one half stacked on top of the
other half. Stacking the code reduces the bar code length, and providing the nominal height
of the code is maintained, it can be omni-directionally scanned.
Enable RSS Limited
"RSS-Limited" is restricted, in that it can only encode 14 digit GTINs (global trade item
number) that begin with either a 0 or a 1. It is not stackable and is not designed to be read
omni-directionally.
Psion Teklogix 7535 G2 Hand-Held Computer User Manual
Appendix C: Bar Code Settings
Decoded (Internal) Scanners

Discrete 2 of 5

C-23