Extron electronics Annotator User Manual page 97

Reference Information
Specifications — Annotator
Video input
Number/signal type ..................... 2 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; progressive or HD)
Connectors ..................................... 2 female 15-pin HD: RGBHV, RGBS, RGsB, component video
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels ........ Analog: 0.0 V to 2.0 Vp-p with no offset
Impedance ...................................... 75 ohms
Horizontal frequency .................... Autoscan 15 kHz to 100 kHz
Vertical frequency .......................... Autoscan 50 Hz to 120 Hz
Resolution range ........................... 640x480 to 1920x1200*, 480p, 576p, 720p, 1080i, and 1080p, digitized pixel for
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 0.5 V
Video processing
Digital sampling ............................ 30 bit, 10 bits per color; 13.5 MHz standard (video), 162 MHz standard (RGB,
Colors .............................................. 1 billion, 1024 per color channel
Encoder (for scan converted output)
Horizontal filtering (for scan converted output)
Vertical filtering (for scan converted output)
Encoder filtering (for scan converted output)
Video output
Number/signal type ..................... 2 buffered scaled RGBHV, RGBS, RGsB, or scaled HD component video
Connectors ..................................... 6 female BNC: RGB or component video
A-2 Annotator • Reference Information
1 RGBHV, RGBS, RGsB, component video (Y, R-Y, B-Y; interlaced,
progressive, HD), S-video, composite video
1 component video (Y, R-Y, B-Y; interlaced), S-video, composite video
1 S-video, composite video
1 single link DVI-D
1 optional SDI, HD-SDI
5 female BNC: RGBHV, RGBS, RGsB, component video, S-video, composite
video
3 female BNC: component video, S-video, composite video
2 female BNC: S-video, composite video
1 female DVI-I: DVI-D
1 female BNC: optional SDI, HD-SDI
0.8 Vp-p for SDI
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
pixel; higher resolutions are undersampled.
*Reduced blanking
YUVp, DVI)
10 bit digital
3 levels
3 levels
3 levels
(Y, R-Y, B-Y)
1 MTP
1 optional single link DVI-D; HD-SDI; or interlaced component video, S-
video, composite video
1 female 15-pin HD: RGB or component video
1 female RJ-45: output to an MTP device
1 slot for an optional DVI-D, HD-SDI, or interlaced component, S-video,
composite video output card