Job Control; Page Size; Output Tray - Brother HL-1050 Technical Reference Manual

4.

JOB CONTROL

4.1.1.

Page size

Esc& #A


# stands for the type of paper or envelope to be used.
Values for # correspond to the paper or envelope sizes shown in the table. Envelopes sizes are shown in the
shaded part of the table.
Model
1 Executive
2 Letter
3 Legal
25 A5
26 A4
45 B5 (JIS)
100 B5
1024 B6
1025 A5
1026 A6
2048 16"
80 Monarch
81 COM-10
90 International
DL
91 International
C5
• When the printer receives this command any unprinted pages are printed and the left, right and top margins
and the text length are set to their factory defaults for the new page size.
• The cursor is moved to the top left of the text area on the new page.
• Depending on your model, you may also set the page size from the printer's control panel or remote printer
console program by setting PAPER in PAGE FORMAT mode to the page size you require (see the User
Guide).
• If the paper size you select differs from the size of the currently loaded paper, a message appears in the
control panel prompting you to load the selected size of paper (for HL-1660e, 2060 and 2400C).
Example)
Select letter size
4.1.2.

Output tray

Esc& #G


# denotes the output tray.
•
1: Select the printer output tray.
•
3: Select #1 bin.
•
4: Select #2 bin.
• 5: Select #3 bin.
• 6: Select #4 bin.
•
7: Select #5 bin.
•
8: Select #6 bin.
•
9: Select #7 bin.
•
10: Select #8 bin.
• 11: Select #9 bin.
• 12: Select #10 bin.
(27)(38)(108)#(65)
HL-1050 HL-1070







































Esc&l2A
(27)(38)(108)#(71)
CHAPTER 2 "PCL" - 15
<1Bh><26h><6Ch>#<41h>
HL-1250/ HL-1270N HL-1660e
P2500










































<1Bh><26h><6Ch><32h><41h>
<1Bh><26h><6Ch>#<47h>
HL-2060 HL-2400C













































99/08/03