12. Separator; Banner Sheet; 13. Job Control; Print Abortion - Brother HL-4000CN Service Manual

12. SEPARATOR

12.1

Banner Sheet

A banner sheet can be inserted at the beginning or end of a job. The document name,
port name, or other is printed in monochrome. However, the MAC driver does not
support the banner at the end.

13. JOB CONTROL

13.1

Print Abortion

From the control panel, the current job can be aborted (discarded).
13.2

Forced Ejection

This function forcibly prints and ejects received data if data reception from the host is
awaited in the middle of job processing.
13.3

Job Timeout

If job transfer is interrupted for a specified time (changeable or settable to infinite from
the control panel), the data is discarded as an error.
13.4

Job Recovery

A job may fail due to a paper jam. In this case, the job is automatically executed once
released.

14. OTHER FUNCTIONS

14.1

User Job Registration Function

Various print settings can be registered in a printer driver with arbitrary names for calling.
14.2

Billing Count Function

This function counts normally printed pages. If enabled in the C/E diag. setting, the user
can check the count from the control panel. This is disabled at shipping from the factory.
Counters
Color print counter
Monochrome print counter
Total print counter
14.3

Toner Level Display

The short-of-toner status can be displayed by CentreWare Internet Services.
Count contents
Counts color prints. (7 digits)
Counts monochrome prints. (7 digits)
Counts both color and monochrome prints. (7 digits)
I-15