Brother HL-1050 Technical Reference Manual page 215

Variables Description
DUPLEX Duplex mode
BINDING Returns the setting of binding edge
selection for duplex printing.
FIRSTPRINT First print mode. This makes the first
print speed faster by starting the
polygon mirror motor at Power On.
Setting to MIDDLE is effective only
for the first page after Power ON.
Setting to HIGH makes the scanner
motor rotate continuously.
DENSITY Returns the printing density level
setting from 1 to 15. The default
value is 8.
LANG Returns the language for control
panel and status readback
information.
CPLOCK Returns the lock status of the control
panel. If OFF, the control panel is
unlocked. If ON, the control panel is
locked.
PASSWORD Password for panel lock to write to
the NVRAM with the
DEFAULT/INITIALIZE command.
ECONOMODE Toner Saving Mode
ECONOLEVEL Level for Toner saving mode. If set
to 1, approx. 50 % toner is saved. If
set to 2, approx. 25% toner is saved.
MPTRAY MP Tray Priority For AUTO feeder
selection mode.
AUTOSLEEP Power Save Mode
TIMEOUTSLEEP Timeout for Power Save mode. The
printer goes into the power save
mode after this time-out period
(minutes).
MEDIATYPE Media Type. The temperature of
fixing unit is adjusted depending on
this setting.
HUMIDITY Depending on this setting, the fixing
voltage of the printer is adjusted.
CHAPTER 5 PJL - 23
Sample Value Range
ON, OFF
LONGEDGE, SHORTEDGE
NORMAL, MIDDLE, HIGH
1 (lighter) to 15 (darker)
ENGLISH, FRENCH, GERMAN,
DUTCH, SPANISH, ITALIAN,
FINNISH, NORWEGIAN,
PORTUGUESE, DANISH
OFF, ON
0 to65535
OFF, ON
1, 2
CASSETTE, FIRST
ON, OFF
1 to 99
REGULAR, THICK,
TRANSPARENCY
LOW, HIGH
99/08/03