Scrollmsg Command; Scrollopmsg Command; Enginestart Command; Options - Brother HL-1050 Technical Reference Manual

99/08/03
2.7.

SCROLLMSG Command

Syntax:
@PJL SCROLLMSG DISPLAY="This is SCROLLMSG.\" <LF>
Comment:
This is to display a message on the LCD. The function is almost the same as the RDYMSG command, though
this command enables to display a series of characters (Max. 32 characters) until "\" in scroll mode.
2.8.

SCROLLOPMSG Command

Syntax:
@PJL SCROLLOPMSG DISPLAY="This is SCROLLOPMSG.\" <LF>
Comment:
This is to turn the printer into off-line and display a message on the LCD. The function is almost the same as the
OPMSG command, though this command enables you to display a series of characters(Max. 32 characters) until
a "\" is encountered in the scroll message.
2.9.

ENGINESTART Command

Syntax:
@PJL ENGINESTART <LF>
Comment:
Start feeding paper continuously.

2.10. Options

APT
Turn APT ON or OFF.
Default = OFF
FIRSTPRINT (For HL-1660e/2060 only)
Switching the printing speed for the 1st page among NORMAL, MIDDLE and HIGH.
Default = NORMAL
HUMIDITY (For HL-1660e/2060 only)
Switching the charging voltage between HIGH and LOW, depending on the humidity. When it is low humidity,
LOW should be used.
Default = LOW
DPXMODE (For HL-1660e/2060 only)
Changing the page order for duplex using Long Edge Binding.
FAST 2- 4- 1- 3- 6- 8- 5- 7
SLOW 2- 1- 4- 3- 6- 5- 8- 7
Default = FAST
APPENDIX E REFERENCE LIST OF HL-1660e/2060/2400C PJL COMMANDS - 6