Brother HL-1050 Technical Reference Manual page 127


ESC*b#V r, r, r, r , r...→ Plane 1
ESC*b#V g, g, g, g , g...→ Plane 2
ESC*b#W b, b, b, b , b...→ Plane 3
ESC*b#V r, r, r, r, r...→ Plane 1
ESC*b#V g, g, g, g, g...→ Plane 2
** The Italic characters shown above are the index No. at the 4th pixel in the 1st raster.
[Example]
If you want to send RGB=(1,1,1)(0,1,1)(1,0,1)(0,0,1)(1,1,0)(0,1,0)(1,0,0)(0,0,0);
** The values in the brackets show the RGB value of the pixel.
Enter 'ESC*v6W 00h 02h 01h 01h 01h 01h', then select Send Direct Value by Plane.
Select 1 bit/index.
ESC*r1A
ESC*b1V 10101010B
ESC*b1V 11001100B
ESC*b1W 11110000B
ESC*rC
(xxh: hexadecimal, xxxxxxxxB: binary)
Send Direct Value by Pixel (= 3)
• This sends each value of RGB pixel by pixel.
• Bits/index must be 8.


ESC*b#W r, g, b, r, g, b, r, g, b, r, g, b ,...→ 1st raster
ESC*b#W r, g, b, r, g, b, r, g, b, r, g, b,...→ 2nd raster
ESC*b#W r, g, b, r, g, b, r, g, b, r, g, b,...→ 3rd raster
ESC*b#W r, g, b, r, g, b, r, g, b, r, g, b,...→ 4th raster
ESC*b#W r, g, b, r, g, b, r, g, b, r, g, b,...→ 5th raster
** The Italic characters shown above are the index No. at the 4th pixel in the 1st raster.
[Example]
If you want to send the RGB value below;
RGB value.
(0,0,0)(128,128,128)(128,64,0)(255,128,64)
(128,128,128)(128,64,0)(255,128,64) (0,0,0)
(128,64,0)(255,128,64) (0,0,0) (128,128,128)
** The values in the brackets show the RGB value of the pixel.
Enter 'ESC*v6W 00h 03h 08h 08h 08h 08h', then select Send Direct Value by Pixel.
Select 8 bits/index.
ESC*r1A
ESC*b12V 00h 00h 00h 80h 80h 80h 80h 40h 00h ffh 80h 40h
ESC*b12V 80h 80h 80h 80h 40h 00h ffh 80h 40h 00h 00h 00h
ESC*b12W 80h 40h 00h ffh 80h 40h 00h 00h 00h 80h 80h 80h
ESC*rC
(xxh: hexadecimal, xxxxxxxxB: binary)
Start Raster Transfer
Send Plane 1 data (Red data)
Send Plane 2 data (Green data)
Send Plane 3 data (Blue data)
End Raster Transfer
st
1 raster
2nd raster
3rd raster
CHAPTER 3 "PCL5C" - 7
1st raster
2nd raster
Start Raster Transfer
Send Plane 1 data (Red data)
Send Plane 2 data (Green data)
Send Plane 3 data (Blue data)
End Raster Transfer
99/08/04