Kernel Commands; A Command To Execute Printer Works - Brother HL-1050 Technical Reference Manual

2.6.

Kernel Commands

EXECUTE:
SUPERUSER:
SUPERUSEROFF: Exits from the SUPERUSER mode
WNVRAM:
WNVRAMBIT:
RNVRAM:
2.6.1.

A command to execute printer works

Command
@PJL EXECUTE parameter<LF>
(Parameter)
SHUTDOWN:
DEMOPAGE:
TESTPRINT:
RESIFONT:
PERMFONT:
PRTCONFIG:
ROTATEROLLER: Rotate the paper pick up roller half way for ease of cleaning.
Explanation
This command remotely controls the printer to perform the above specified actions.
APPENDIX D REFERENCE LIST OF HL-1050/1070/1250/1270N/P2500 PJL COMMANDS - 9
Executes printer action (Related with RPC)
Enters into the SUPERUSER mode
Writes to the NV-RAM
Writes to the NV-RAM bit by bit
Reads the NV-RAM
Enter into sleep mode.
Perform a demo print.
Print a test print page. (This is ignored when it is in PS mode.)
Print a resident fonts list. (Print a font demo when it is in PS mode.)
Print a permanent download font list.
Print a setting value.
99/08/03