How To Read The Card Commands Specification; Commands; Available Devices; Description - Brother HL-1050 Technical Reference Manual

99/08/04
2.

HOW TO READ THE CARD COMMANDS SPECIFICATION

Each command is described in the following four sections of this manual.
2.1

Commands

Command data sequences and syntax.
ESC or CR stands for 0x1b or 0x0d as follows;
ESC ----0x1b
CR ---- 0x0d
2.2

Available Devices

The supported memory card devices which can be used for each command are represented in this manual
using the abbreviations as follows.
2.3

Description

The detailed description about each command with command structure and syntax.
2.4

Error

Possible errors that may occur during cards operations.
Abbreviation
F Flash memory card
A ATA flash memory card
H PCMCIA hard disk card
I HL-1270N internal flash memory
APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 4
Device Type