Push/Pop Palette - Brother HL-1050 Technical Reference Manual

3.6.

Push/Pop Palette

Command
ESC*p#P (27)(42)(112)#(80)
# = 0 * Push palette
= 1 Pop palette
* Default value = 0
• The value of 0 pushes the current palette onto the palette stack. This command does not affect the current
palette.
• The value of 1 pops the palette from the top of the palette stack and replacesthe current palette with it.
• If the Pop Palette command is executed without a Push palette having first having been executed, it is
ignored.
• The palette stack is controlled as a First In Last Out stack.
• The parameters below are pushed to the palette stack;

Color Mode (Simple Color / PCL Color Mode)

Parameters to be set by the Set PCL Color Setting command

Encoding Mode (mode 0, 1, 2, 3)

Bits / index

Bits / value #1

Bits / value #2

Bits / value #3

Black and White Reference

Parameter of Render Algorithm

Parameter of Gamma Correction

Color Palette

Dither to be downloaded by the Download Dither Matrix command

Pen Width (HP-GL/2)
• The data below is pushed to the palette stack;

Colors to be selected by the Select Color command

Colors to be selected by the Set #1, #2, #3 command

Monochrome Print Mode
<1Bh><2Ah><70h>#<50h>
CHAPTER 3 "PCL5C" - 11
99/08/04