Info Features - Brother HL-1050 Technical Reference Manual

2.4.

INFO FEATURES

Command
@PJL INFO FEATURES<LF>
Response
@PJL INFO FEATURES <CR><LF>
FEATURES [7 ENUMERATED]<CR><LF>
RS<CR><LF>
PS<CR><LF>
APLTLK<CR><LF>
XIO<CR><LF>
R600<CR><LF>
PAGEP<CR><LF>
HPGL<CR><LF>
(When there are no FEATURES)
@PJL INFO FEATURES <CR><LF>
FEATURES [n ENUMERATED]<CR><LF>
NONE<CR><LF>
Explanation
This is the same FEATURES as the PJL INFO CONFIG command.
APPENDIX D REFERENCE LIST OF HL-1050/1070/1250/1270N/P2500 PJL COMMANDS - 7
(When a serial I/F is attached.)
(When a PostScript option is installed.)
(When an AppleTalk I/F is attached.)
(When an XIO I/F is attached.)
(600 dpi)
(If the printer supports the page protection function)
(If the printer supports HP-GL)
* Note that this is different from INFO CONFIG.
99/08/03