Brother HL-1050 Technical Reference Manual page 431
Hide thumbs
Also See for HL-1050:
- Technical reference manual (517 pages) ,
- Service manual (305 pages) ,
- User manual (91 pages)
Table of Contents
Advertisement
3.1.4.
PCL output tray setting
Command
Esc&l#G (27)(38)(108)#(71)
Parameter
# denotes the output tray.
•
1:
Select the printer face-down output tray.
•
3:
Select #1 bin of the Mailbox unit.
•
4:
Select #2 bin of the Mailbox unit.
•
5:
Select #3 bin of the Mailbox unit.
•
6:
Select #4 bin of the Mailbox unit.
•
7:
Select #5 bin of the Mailbox unit.
•
8:
Select #6 bin of the Mailbox unit.
•
9:
Select #7 bin of the Mailbox unit.
•
10:
Select #8 bin of the Mailbox unit.
•
11:
Select #9 bin of the Mailbox unit.
•
12:
Select #10 bin of the Mailbox unit.
Default = 1
Explanation
• This command selects the specified output tray, trays defined as Mailboxes are numbered from the bottom of
the unit upwards
• This command is ignored when the specified tray is not available.
• The PJL OUTBIN command is ignored when this command is executed.
• Refer to the Technical Reference Guide Section 4.1.2 'Output tray' in Chapter 2 'PCL'.
3.1.5.
PS output tray & mode setting
Command
TrayMode setoutputmode
Parameter
TrayMode
•
0
Select the printer face-down output tray.
•
1:
Select the stacker function.
•
2:
Select the sorter function.
•
3~10:
Select the printer face-down output tray.
•
11:
Select #1 bin of the Mailbox unit.
•
12:
Select #2 bin of the Mailbox unit.
•
13:
Select #3 bin of the Mailbox unit.
•
14:
Select #4 bin of the Mailbox unit.
•
15
Select #5 bin of the Mailbox unit.
•
16:
Select #6 bin of the Mailbox unit.
•
17:
Select #7 bin of the Mailbox unit.
•
18:
Select #8 bin of the Mailbox unit.
•
19
Select #9 bin of the Mailbox unit.
•
20:
Select #10 bin of the Mailbox unit.
Default = 0
APPENDIX E REFERENCE LIST OF MX-2000 SERIES UNIQUE COMMANDS - 7
<1Bh><38h><6ch>#<47h>
99/08/03
Advertisement
Chapters
Table of Contents
