Save Image (Fixed Printing Location) (For Hl-1660E/2060/2400C Only); Save Image (Printing Location Not Fixed) (For Hl-1660E/2060/2400C Only) - Brother HL-1050 Technical Reference Manual

Hide thumbs Also See for HL-1050:
Table of Contents

Advertisement

99/08/04
Error
43 CARD1 W ERROR
43 CARD2 W ERROR
3.6.4
Command
ESC CR ! 12348F
Available Devices
F
Description
After transferring the last print data into the image data area, this command saves the data with the ID
which is specified with the ESC & f # Y (Macro ID Configuration) command as a PCL command on
the card.
The printing location for the saved data is fixed on the page.
The data can be executed by the data execute command (ESC CR ! 12349 F). (It cannot be executed
from an ATA flash ROM card, PCMCIA hard disk card or HL-1270N internal flash memory by the data
execute command.)
When two cards are inserted into the printer, the command saves the data on the card specified with the
select card command. When only one card is inserted, the command saves the data on that card.
This command is only valid in PCL emulation.
Error
43 CARD1 W ERROR
43 CARD2 W ERROR
3.6.5
Command
ESC CR ! 12350F
Available Device
F
Description
After transferring the last print data into the image data area, this command saves the data with the ID
which is specified with the ESC & f # Y (Macro ID Configuration) command as a PCL command on
the card.
The printing location for the saved data is not fixed on the page.
The move cursor command allows you to print the data anywhere you want when executing this
command.
The data can be executed by the data execute command (ESC CR ! 12349 F). (It cannot be executed
from an ATA flash ROM card, PCMCIA hard disk card or HL-1270N internal flash memory by the data
execute command.)
When two cards are inserted into the printer, the command saves the data on the card specified with the
select card command. When only one card is inserted, the command saves the data on that card.
This command is only valid in PCL emulation.
Error
43 CARD1 W ERROR
43 CARD2 W ERROR

Save image (Fixed printing location) (For HL-1660e/2060/2400C only)

Save image (Printing location not fixed) (For HL-1660e/2060/2400C only)

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 12
(Device Type) F, A, H, I
(Device Type) F, A, H, I
(Device Type) F
(Device Type) F
(Device Type) F
(Device Type) F

Advertisement

Table of Contents
loading

Table of Contents