Page Set Up - Brother HL-1050 Technical Reference Manual

99/08/04
User reset
EscCR!#R
• # = 0, the printer restores to the current user setting.
• # = 1, the printer restores to user settings 1.
• # = 2, the printer restores to user settings 2.
Paper Input Control
EscEMn
n Value
n = 0
n = 1
n = 2
n = 3
n = R
n Value
n = 0
n = 1/2
n = R
n Value
n = 0
n = 1
n = 2
n = R
Enable out-of-paper sensor
Esc9
The printer ignores this command.
Disable out-of-paper sensor
Esc8
The printer ignores this command.
6.2.

Page set up

Set page length
EscC n
This command sets the page length in lines.


EscCNULn (27)(67)(00)n
• This command sets the page length in inches.
• The top of form position is set to be the current line.
• n is the number of lines that make up one page, or the length of the page in inches, according to
which form of the command is used.
• If the first form of the command is used (n = the number of lines in the page) the current line spacing
setting is used to determine the length of the page.
• If the first form of the command is used, n must be in the range 1 to 127.
• If the second form of the command is used (n = page length in inches), n must be in the range 1 to 14.
LPRINT CHR$(27); CHR$(67); CHR$(40); '40 lines per page
LPRINT CHR$(27); CHR$(67); CHR$(0); CHR$(11); '11 inches per page
(27)(13)(33)#(82)
(27)(25)n
HL-1660e/2060/2400C
Initialize the feeder mode.
Feed from the MP tray.
Feed from Tray 1.
Feed from Tray 2.
Eject paper.
HL-1050
Initialize the feeder mode.
Feed from the tray.
Eject paper.
HL-1250/1270N/P2500
Initialize the feeder mode.
Feed from the Tray 1.
Feed from the Tray 2.
Eject paper.
(27)(57)
(27)(56)
(27)(67)n
CHAPTER 6 EPSON - 12
<1Bh><0Dh><21h>#<52h>
<1Bh><45h>n
<1Bh><39h>
<1Bh><38h>
<1Bh><43h>n
<1Bh><43h><00h>n