Execute Data (For Hl-1660E/2060/2400C Only) - Brother HL-1050 Technical Reference Manual

99/08/04
3.4 Data
3.4.1
Command
ESC CR ! 12347F ID(2byte) size(4byte) data...
Available Devices
F, A, H
Description
This command saves data which is sent from the PC with the specified ID onto the card.
If there is insufficient memory in the printer to store the data, a memory full error occurs.
When two cards are inserted into the printer, the command saves the data onto the card specified by the
select card command. When only one card is inserted, the command saves onto that card.
Error
34 MEMORY FULL
43 CARD1 W ERROR
43 CARD2 W ERROR
3.4.2
Command
ESC CR ! 12349F ID(2byte)
Available Devices
F, A, H
Description
This command executes the specified ID data. ("MCRO" type data cannot be executed on the ATA flash
memory card, PCMCIA hard disk card or HL-1270 internal flash memory.)
When two cards are inserted into the printer, the command executes the data on the card specified by the
select card command. When only one card is inserted, the command executes the data on that card.
Error
N/A
Save data (For HL-1660e/2060/2400C only)

Execute data (For HL-1660e/2060/2400C only)

APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 8
(Device Type) F, A, H
(Device Type) F, A, H
(Device Type) F, A, H