Use Card Commands From Postscript - Brother HL-1050 Technical Reference Manual

99/08/04
5.

USE CARD COMMANDS FROM POSTSCRIPT

The PostScript command allows you to write / read the ATA flash ROM card and PCMCIA hard disk
card.
(i.e.)
Create the file named "test" and write the data, "This is a data string" onto the card which is inserted into
Slot 1.
/fl (%disk0%test)(w)file def
fl (This is a data string) write
fl closefile
For PostScript, the following command should be used to specify the hard disk which is to be used;
** # = number
The above number corresponds to the slots of the HL-2400C printer as follows;
Slot 1:
Slot 2:
(%disk#%)
(%disk0%)
(%disk1%)
APPENDIX B - FLASH/PCMCIA CARD COMMANDS - 16